The original line is damaged
Use the complete assembly and connection details to discuss whether a new custom assembly may be fabricated or duplicated.
Custom Line Fabrication / In-Facility Evaluation
Custom A/C Hose & Line Fabrication In Melbourne, FL
When an A/C line is hard to source, obsolete, damaged, or does not match a generic replacement, the full assembly can matter: end connections, route, available markings, and the actual application.
Mercury fabricates or duplicates new custom A/C hose and line assemblies. Bring or send the original component, clear equipment information, and photos so the discussion begins with the real assembly.
When A Parts Lookup Is Not Enough
A Custom A/C Line Is More Than Hose Cut To Length
An unusual end configuration, rigid-line interface, difficult route, or unavailable part number can make a generic listing an incomplete answer. The discussion needs the actual assembly and the application around it.
| Information Mercury Uses | Why It Matters |
|---|---|
| Complete original assembly | Shows the full component and its overall shape. |
| End connections and interfaces | Provides the connection geometry that a generic listing may not explain. |
| Available markings | Adds useful reference points when they are present and readable. |
| Equipment identity and line location | Connects the assembly to the application and routing environment. |
| Route, clearance, heat, and abrasion context | Explains why the original shape and location matter. |
| Current condition and customer question | Frames the practical fabrication or duplication discussion. |
Custom Line Requests
Start With The Situation, Then Review The Assembly
Mercury can discuss fabrication or duplication when a standard catalog line does not appear to match the original. Final options depend on the complete component and the evidence available.
A replacement cannot be located
Review the available markings, application information, and original line together.
The line has a unique end or interface
Provide clear close-up photos and the full assembly before discussing options.
The part comes from older or specialty equipment
Start with the actual component and route rather than assuming a generic fit.
What To Send
The Right Details Make The First Conversation More Useful
Bring the original component when practical. It often carries information that a text description does not capture.
A photo of the complete original assembly from end to end.
Clear close-up photos of both ends and connection areas.
Equipment make, model, serial number, VIN, or other identity information when applicable.
A photo showing where the line runs and the surrounding clearance or route context.
Any readable part numbers, manufacturer marks, or hose markings.
A short explanation of the line question and whether the original component is removed, installed, or unavailable.
Fabrication Options
A Practical Path Depends On The Actual Assembly
Fabricate a custom assembly
Mercury considers whether a new A/C hose or line assembly can be fabricated from the available evidence and application context.
Duplicate an existing assembly
Mercury considers whether the original sample and application information support duplicating a new assembly.
Decline the request
If the available evidence or request falls outside confirmed fabrication scope, Mercury will say so rather than make an unsupported promise.
Related Mercury Resources
See Why Original Geometry And Route Context Matter
Read the supporting resource for a practical explanation of the assembly details that shape a new custom line discussion.
Custom A/C Line Questions
Common Fabrication Questions
Can Mercury duplicate an old A/C line?
Mercury can discuss duplicating a new custom assembly when the original sample and application information support that path. A physical sample, clear end photos, equipment identity, and route context create a stronger starting point than a description alone.
What should I bring or send?
Bring the complete original assembly when practical. Otherwise, send end-to-end and connection photos, equipment identification, readable markings, and a short description of the line question.
Can a part number start the discussion?
Available markings and part information are useful reference points. The complete original assembly, end configuration, and equipment context still help Mercury understand whether a new custom path is practical.
Mercury Hydraulics / Melbourne, Florida
Request A Custom A/C Line Evaluation
Send clear photos of the original assembly, both ends, equipment details, route context, readable markings, and your line question. Mercury’s facility is located at 7610 Coral Dr, Melbourne, FL 32904.
Start With The Component
The direct contact form sends your request to Mercury Hydraulics without opening an email application.