Need two-post lift cylinder repair? Mercury Hydraulics provides on-site hydraulic lift-cylinder repair when the equipment, access, and repair scope make field work practical. In this documented Benwil GPOA-7 repair case, Mercury repaired two lift cylinders at the customer’s facility to help minimize unnecessary downtime.


Benwil GPOA-7 Two-Post Lift Cylinder Repair Completed On-Site
Mercury Hydraulics repaired two hydraulic lift cylinders on a Benwil GPOA-7 two-post lift at the customer’s facility. The model plate photographed at the job identifies the lift as a Benwil GPOA-7 with a 7,000-pound capacity.
For this two-post lift cylinder repair, performing the work at the lift avoided sending the cylinders away before a practical service path was established. On-site hydraulic lift-cylinder repair is planned case by case around the condition of the lift, access to the work area, and the repair work the cylinders require.
What The On-Site Two-Post Lift Cylinder Repair Photos Show
The job photos document the installed Benwil two-post lift, the repair work at the lift columns, and the service-bay environment. This information matters because a two-post lift cylinder repair must be approached around the actual equipment, cylinder arrangement, access, and operating conditions—not a generic replacement description.


Common Two-Post Lift Cylinder Repair Symptoms
A leaking or unreliable two-post lift should not be treated as a routine inconvenience. A hydraulic lift that moves unevenly, leaks fluid, will not hold position, or behaves differently from one side to the other needs a repair conversation based on the actual equipment and symptoms.
- Hydraulic fluid visible at a lift cylinder, rod, gland, hose, fitting, or connection
- Uneven lifting or lowering between the two lift columns
- Slow, inconsistent, drifting, or non-responsive lift movement
- Visible rod damage, corrosion, scoring, damaged mounts, or a damaged cylinder connection
- A lift that will not raise, lower, or hold as expected
- A repeat cylinder problem after earlier lift or hydraulic work
On-Site Two-Post Lift Cylinder Repair Or Shop Repair
The practical repair path depends on the lift, the cylinder condition, access at the service location, and the work that is needed. Some two-post lift cylinder repairs can be performed on-site. Other hydraulic lift cylinders need to be removed and brought to Mercury Hydraulics for controlled disassembly, repair, machining, or additional work.
| Repair Situation | Practical Service Path |
|---|---|
| On-site work is appropriate | Mercury can discuss an on-site two-post lift cylinder repair when the lift, access, condition, and required work support field service. |
| Cylinder needs more extensive work | Mercury can discuss removal and shop-based hydraulic cylinder repair, including repair-driven machining when the component requires it. |
| The symptom may involve more than the cylinder | Document the complete lift, visible fluid, hoses, fittings, controls, and movement concern so the repair request starts with the right evidence. |
What To Send With A Two-Post Lift Cylinder Repair Request
Clear equipment information helps Mercury move from a general lift problem to a practical repair plan. Send the details below before scheduling a repair visit or removing a lift cylinder.
- Lift manufacturer, model, capacity, and readable identification plate
- Photos of the complete two-post lift, both columns, affected cylinders, rods, hoses, fittings, and the first visible leak or damage
- A short video showing the symptom when it is safe to operate the lift
- A description of whether the lift leaks, drifts, moves unevenly, will not hold, or has another operating concern
- Your name, company name, phone number, service address, and the best time to discuss the repair
Request Two-Post Lift Cylinder Repair
If you need two-post lift cylinder repair, contact Mercury Hydraulics with the lift model, photos, visible failure evidence, and service location. Mercury can discuss on-site hydraulic lift-cylinder repair or the shop repair path that matches the work required. Mercury Hydraulics is an independent hydraulic repair facility.
